FREE 2-DAY SHIPPING on all orders!

Questions? We can help! Call us now at: 1-888-404-HVAC (4822)

16" Inch Aluminum Hose Flexible Insulated R-8.0

Out of stock. Notify me when this product is available:

  • High Quality: Aluminum Housing On the Outside and on the Inside For The Best Insulation Value
  • Air-tight Inner Core Decreases The Pressure Loss and Provides A More Hygienic Environment- High Energy Efficient / No fiberglass erosion into air stream.
  • Thick Blanket of Fiberglass Insulation: Which Gives You A R-Value of 8.8
  • Tough Reinforced Metallized Polyester Jacket - Tear and puncture resistan - Air-tight Inner Core - No fiberglass erosion into air stream.
  • Designed To Withold Bends And Sharo Turns WIthout Kinking
16" Inch Aluminum Hose Flexible Insulated R-8.0 Air Duct Pipe for Rigid HVAC Flex Ductwork Insulation - 25' Feet Long

This Aluminum Flex Duct is intended to be used in heating, cooling, ventilation and waste gases transmission lines. Suitable for medium pressure application. It has an outer surface made of High Quality Aluminum Foil and an inner surface made of Metalized PET with high-tensile spring steel wire between the layers. Thermally insulated with Glass-Wool insulation developed especially for flexible ducting. Great emphasis has been invested in the design of this product to prevent it from kinking in sharp bends & turns, and to hold steady and at full diameter in all applications.
All steel wire are applied between PET surfaces to prevent corrosion (oxidization).
Produced in accordance with ISO 9001 - 2008 Quality Management System.
Complies with industry standards of USA: ASTM D-882. European: EN 10270-1-SM. & EN 13180 standards
By means of the smooth surface, which the interior PET provides, this flex duct decreases the pressure loss and provides more hygienic environment by preventing the formation of bacteria.
100% Satisfaction Guaranteed
Don’t worry, you're covered by our 100% Money Back Guarantee, no questions asked. Click Add to Cart now & enjoy a new updated refreshing look of your room.

Why HVAC Premium?
We Emphasize On The HVAC Components With Great Detail To Bring You The Best In HVAC. Trust A Brand That Successfully Narrowed Down The Best In The Field.

168SFLX-R8.0

Why HVAC Premium Ducts?

With our flexible ducts you can be sure that your project won't be slowed down along the way. Great emphasis has been invested in the design of this product to prevent it from kinking in sharp bends & turns, and to hold steady and at full diameter in all applications. Furthermore, with all-steel wire applied between PET surfaces to prevent corrosion (oxidization), you can count on durability.

And don’t worry, you’re covered by our 100% money-back guarantee no questions asked. Click Add to Cart and enjoy a new updated refreshing look to your home.refreshing look to your home.

Product Overview

25 ft

16 in

Why HVAC Premium? 

You may think of grilles and registers as a generic component of the ventilation system in your house, but they are also the most visible representation of your air system. With HVAC Premium you get an extra measure of quality that will be visible to your family members and house guests.

Additional Information

Installation Document Coming Soon

Full Specifications

Dimensions

?

Diameter

?

16 in

?

Length

?

25 ft

Details

?

Product Type

?

Flexible Duct

?

Duct Style

?

Round

?

Outer Material

?

Aluminum

?

Inner Material

?

Metalized PET

?

Quality Accordance

?

ISO 9001 - 2008 QM System

?

Industry Standard Compliance

?

USA: ASTM D-882

?

Inner Spring Material

?

High-Tensile Spring Steel Wire

?

Intended Application

?

Medium Pressure

Warranty/Terms & Conditions

?

Returnable

?

30 Days

?

?

Installation

HVAC Installation FAQs.

You should replace your HVAC filters every 30 days to keep your air healthy and your HVAC system running efficiently. To help you, here’s a simple guide to changing your filters for vent registers:

1. Turn your HVAC unit off.

2. Slide the tabs to open the door on your air filter grille to access the filter.

3. Remove the used or dirty filter.

4. Before installing your new filter, ensure the airflow arrows are pointing in the direction of your unit.

5. Once the filter is installed, close the door on your air filter grille.

6. Turn your HVAC unit on for clean, healthy air.

For our full catalog of filters — including our pleated MERV 8 products — click here.

A 24x24 ceiling return air grille will need a larger frame. For example, if your grille is 24x24 it will in all probability have a 26x26 diameter. This means that the grille will need a 24x24 hole and a 26x26 frame to fit properly.

Installation

Turn off your HVAC unit. Wear protective goggles to keep any dust or dirt particles from falling from the ceiling return air grille and into your eyes. Secure your ladder and then unscrew the frame to remove the grille. Next, put the frame in place and secure it with screws. Install the new grille to complete the task.

Click here to browse our comprehensive catalog of sidewall and ceiling supply return grilles.

First off, a 20x20 decorative air return grille will require a larger frame for optimum installation. This means that a 20x20 decorative air return grille with 22x22 dimensions will need a 20x20 hole and a 22x22 frame to fit properly.

Once you've got the sizes sorted, unscrew the frame and then take out the grille. Next, put the frame in place and secure it with screws. Once that’s done, install the new grille to complete the task.

For high-quality products with visual appeal, browse our full range of air return grilles.

1. Measure the size of the vent hole and the frame to ensure you purchase the correct grille size. A return air filter grille with a 20x20 size and 22x22 dimensions will require a 20x20 hole and a 22x22 frame.

2. Unscrew the frame and then remove the grille. Position the frame and secure it with screws. Once the frame is in place, install the new grille to complete the task.

Browse our comprehensive catalog of return air filter grilles here

Correct! The grille requires a 12 x 12 hole with a larger frame.

Check out our comprehensive range of wall vent grilles.

Screw out the old grille, and then unpackage and screw in your new grille. All HVAC Premium grilles come with either black or white hex head screws to match the color of your grille. If you're installing a filter model, you'll need to open the filter grille and find the holes at the sides to screw into the wall. Once you close the filter door, the screws won't be noticeable.

Click here to view our catalog which comprises of a comprehensive range of grilles

The most commonly used material is steel because it's strong and economical. However, if your grille is located in a humid place — such as next to a sauna, swimming pool, or in a bathroom — plastic or aluminum materials are the common materials used. Plastic, however, is at a disadvantage as it lacks strength and can discolor over time. Your best bet for areas with high humidity is aluminum. HVAC Premium has a wide range of aluminum grilles, from Cubic Core to perforated — you can view our selection here.

To find out more about our aluminum Cube Core grilles, click here.

The steel return air grille is not completely flat. The front service is around ~0.4 inches from the wall, where it covers the opening of the duct.

We've got a massive range of return air grilles, which you can browse here.

Search

window.onload = function(){ $(".product-overview-material").css("background-image", "none"); $(".product-overview-material").css("background-image", "url('https://5876054.fs1.hubspotusercontent-na1.net/hubfs/5876054/Shopify%20Website%20SVGs/Product%20Overview/aluminum.svg')"); }