FREE 2-DAY SHIPPING on all orders!

Questions? We can help! Call us now at: 1-888-404-HVAC (4822)

8" X 6" 3-Way AIR SUPPLY GRILLE - DUCT COVER & DIFFUSER - Flat Stamped

  • 8"w X 6"h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 9.75"w X 7.75"h - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
  • High Quality Solid Stamped Steel Construction, No Scuff Powder Coat Durable Finish, No Sharp Edges, 2 Recessed Screw Holes On Each Side with Screws Included, EASY INSTALLATION
  • LOUVERED Supply Grille for Sidewall or Ceiling Application with SmoothGlide Technology, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet Lever
  • QUALITY PACKAGING - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality
  • Easy Unrestricted Air Flow Deflection For Your HVAC System - 1/2 Inch Spaced Fins

HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors, DIY projects, and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project look no further than HVAC Premium. We have the largest selection of Grilles Registers & Diffusers.

HVAC Premium has sold over 5,000,000 Grilles - We are proud of our many happy customers!

8"w X 6"h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 9.75"w X 7.75"h - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

How To Measure A Register Grille:

Overall Size:

MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14" wide by 20" tall, order a 14x20.

Height vs Width

The first number in a register grille size represents the width, the second number represents the height.

Example: If your duct opening is 14" wide by 20" tall, order a 14x20.

This solid stamped steel register vent grille will provide your home with ideal and quiet, rattle free airflow and ventilation for your air-conditioning and heating system as well as smooth opening and closing back dampers. The back dampers are adjusted by the lever at the front of the register so that you can easily control the air flow of your HVAC system. No sharp edges. You can install this register supply grille on the ceiling or on the sidewall. The installation is simple, just screw the grille on to your wall with the screws that are included and that’s it!

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% money-back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

Out of stock. Notify me when this product is available:

G863WY FBA

We've Got You Covered

Don’t worry, you’re covered by our 100% money-back guarantee no questions asked. Click Add to Cart and enjoy a new updated refreshing look to your home.

Product Overview

8 in

6 in

9.75 in

7.75 in

Why HVAC Premium? 

You may think of grilles and registers as a generic component of the ventilation system in your house, but they are also the most visible representation of your air system. With HVAC Premium you get an extra measure of quality that will be visible to your family members and house guests.

Additional Information

Installation Document Coming Soon

Full Specifications

Dimensions

?

Inside Width

?

8in

?

Inside Length

?

6in

?

Outside Width

?

9.75in

?

Outside Length

?

7.75in

Details

?

Type

?

Return Grille

?

Material

?

Steel

?

Color/Finish

?

White

?

Airflow Strength

?

Maximum

?

Powder Coated

?

Yes

?

Installation Location

?

Sidewall & Ceiling

Warranty/Terms & Conditions

?

Returnable

?

30 Days

?

?

How To Measure A Grille

Overall Size

Measure the size of the duct opening. Do not measure the old vent cover. If your duct opening is 14" wide by 20" tall, order a 14x20

Height vs. Width

The first number in a grille size represents the width, the second number represents the height.

Installation

HVAC Installation FAQs.

You should replace your HVAC filters every 30 days to keep your air healthy and your HVAC system running efficiently. To help you, here’s a simple guide to changing your filters for vent registers:

1. Turn your HVAC unit off.

2. Slide the tabs to open the door on your air filter grille to access the filter.

3. Remove the used or dirty filter.

4. Before installing your new filter, ensure the airflow arrows are pointing in the direction of your unit.

5. Once the filter is installed, close the door on your air filter grille.

6. Turn your HVAC unit on for clean, healthy air.

For our full catalog of filters — including our pleated MERV 8 products — click here.

A 24x24 ceiling return air grille will need a larger frame. For example, if your grille is 24x24 it will in all probability have a 26x26 diameter. This means that the grille will need a 24x24 hole and a 26x26 frame to fit properly.

Installation

Turn off your HVAC unit. Wear protective goggles to keep any dust or dirt particles from falling from the ceiling return air grille and into your eyes. Secure your ladder and then unscrew the frame to remove the grille. Next, put the frame in place and secure it with screws. Install the new grille to complete the task.

Click here to browse our comprehensive catalog of sidewall and ceiling supply return grilles.

First off, a 20x20 decorative air return grille will require a larger frame for optimum installation. This means that a 20x20 decorative air return grille with 22x22 dimensions will need a 20x20 hole and a 22x22 frame to fit properly.

Once you've got the sizes sorted, unscrew the frame and then take out the grille. Next, put the frame in place and secure it with screws. Once that’s done, install the new grille to complete the task.

For high-quality products with visual appeal, browse our full range of air return grilles.

1. Measure the size of the vent hole and the frame to ensure you purchase the correct grille size. A return air filter grille with a 20x20 size and 22x22 dimensions will require a 20x20 hole and a 22x22 frame.

2. Unscrew the frame and then remove the grille. Position the frame and secure it with screws. Once the frame is in place, install the new grille to complete the task.

Browse our comprehensive catalog of return air filter grilles here

Correct! The grille requires a 12 x 12 hole with a larger frame.

Check out our comprehensive range of wall vent grilles.

Screw out the old grille, and then unpackage and screw in your new grille. All HVAC Premium grilles come with either black or white hex head screws to match the color of your grille. If you're installing a filter model, you'll need to open the filter grille and find the holes at the sides to screw into the wall. Once you close the filter door, the screws won't be noticeable.

Click here to view our catalog which comprises of a comprehensive range of grilles

The most commonly used material is steel because it's strong and economical. However, if your grille is located in a humid place — such as next to a sauna, swimming pool, or in a bathroom — plastic or aluminum materials are the common materials used. Plastic, however, is at a disadvantage as it lacks strength and can discolor over time. Your best bet for areas with high humidity is aluminum. HVAC Premium has a wide range of aluminum grilles, from Cubic Core to perforated — you can view our selection here.

To find out more about our aluminum Cube Core grilles, click here.

The steel return air grille is not completely flat. The front service is around ~0.4 inches from the wall, where it covers the opening of the duct.

We've got a massive range of return air grilles, which you can browse here.

Search