FREE 2-DAY SHIPPING on all orders!

Questions? We can help! Call us now at: 1-888-404-HVAC (4822)

32" x 14" Return Air Grille - Sidewall and ceiling

Out of stock. Notify me when this product is available:

  • 32"w X 14"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 33.75" Width X 15.75" Height - SEE IN DESCRIPTION HOW TO MEASURE A GRILLE PROPERLY
  • High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
  • Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
  • Easy Unrestricted Air Flow For Your HVAC System - 50° angled to provide maximum airflow
  • Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
32" x 14" Return Air Grille - Sidewall and ceiling - HVAC Vent Duct Cover Diffuser - [White]
32"w X 14"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 33.75" Width X 15.75" Height - SEE IN DESCRIPTION HOW TO MEASURE A GRILLE PROPERLY

Why HVAC Premium?
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
With HVAC Premium you get an extra measure of quality that will be visible to your family members and house guests.

Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Heavy Gauge Steel. Heavier gauge than needed, built for durability and long life in mind, but still light and handy.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75".

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.

100% Satisfaction Guaranteed
Don’t worry, you're covered by our 100% Money Back Guarantee, no questions asked. Click Add to Cart now & enjoy a new updated refreshing look of your room.

RG3214 HP

Why Flat Stamped Steel?

The HVAC Premium flat stamped steel cold air vent covers are unmatched in quality and durability.  Expect maximum airflow from your grille with 50 degree angled louvers. Install them on your wall or ceiling to give your home a freshly renovated look.

Don’t worry, you’re covered by our 100% money-back guarantee no questions asked. Click Add to Cart and enjoy a new updated refreshing look to your home.

Product Overview

32 in

14 in

33.75 in

15.75 in

Why HVAC Premium? 

You may think of grilles and registers as a generic component of the ventilation system in your house, but they are also the most visible representation of your air system. With HVAC Premium you get an extra measure of quality that will be visible to your family members and house guests.

Additional Information

Coming Soon

Full Specifications

Dimensions

?

Inside Width

?

32in

?

Inside Length

?

14in

?

Outside Width

?

33.75in

?

Outside Length

?

15.75in

Details

?

Type

?

Return Grille

?

Material

?

?

Color/Finish

?

?

Airflow Strength

?

Maximum

?

Powder Coated

?

Yes

?

Installation Location

?

Sidewall and Ceiling

Warranty/Terms & Conditions

?

Returnable

?

30 Days

?

?

How To Measure A Grille

Overall Size

Measure the size of the duct opening. Do not measure the old vent cover. If your duct opening is 14" wide by 20" tall, order a 14x20

Height vs. Width

The first number in a grille size represents the width, the second number represents the height.

Installation

HVAC Installation FAQs.

You should replace your HVAC filters every 30 days to keep your air healthy and your HVAC system running efficiently. To help you, here’s a simple guide to changing your filters for vent registers:

1. Turn your HVAC unit off.

2. Slide the tabs to open the door on your air filter grille to access the filter.

3. Remove the used or dirty filter.

4. Before installing your new filter, ensure the airflow arrows are pointing in the direction of your unit.

5. Once the filter is installed, close the door on your air filter grille.

6. Turn your HVAC unit on for clean, healthy air.

For our full catalog of filters — including our pleated MERV 8 products — click here.

A 24x24 ceiling return air grille will need a larger frame. For example, if your grille is 24x24 it will in all probability have a 26x26 diameter. This means that the grille will need a 24x24 hole and a 26x26 frame to fit properly.

Installation

Turn off your HVAC unit. Wear protective goggles to keep any dust or dirt particles from falling from the ceiling return air grille and into your eyes. Secure your ladder and then unscrew the frame to remove the grille. Next, put the frame in place and secure it with screws. Install the new grille to complete the task.

Click here to browse our comprehensive catalog of sidewall and ceiling supply return grilles.

First off, a 20x20 decorative air return grille will require a larger frame for optimum installation. This means that a 20x20 decorative air return grille with 22x22 dimensions will need a 20x20 hole and a 22x22 frame to fit properly.

Once you've got the sizes sorted, unscrew the frame and then take out the grille. Next, put the frame in place and secure it with screws. Once that’s done, install the new grille to complete the task.

For high-quality products with visual appeal, browse our full range of air return grilles.

1. Measure the size of the vent hole and the frame to ensure you purchase the correct grille size. A return air filter grille with a 20x20 size and 22x22 dimensions will require a 20x20 hole and a 22x22 frame.

2. Unscrew the frame and then remove the grille. Position the frame and secure it with screws. Once the frame is in place, install the new grille to complete the task.

Browse our comprehensive catalog of return air filter grilles here

Correct! The grille requires a 12 x 12 hole with a larger frame.

Check out our comprehensive range of wall vent grilles.

Screw out the old grille, and then unpackage and screw in your new grille. All HVAC Premium grilles come with either black or white hex head screws to match the color of your grille. If you're installing a filter model, you'll need to open the filter grille and find the holes at the sides to screw into the wall. Once you close the filter door, the screws won't be noticeable.

Click here to view our catalog which comprises of a comprehensive range of grilles

The most commonly used material is steel because it's strong and economical. However, if your grille is located in a humid place — such as next to a sauna, swimming pool, or in a bathroom — plastic or aluminum materials are the common materials used. Plastic, however, is at a disadvantage as it lacks strength and can discolor over time. Your best bet for areas with high humidity is aluminum. HVAC Premium has a wide range of aluminum grilles, from Cubic Core to perforated — you can view our selection here.

To find out more about our aluminum Cube Core grilles, click here.

The steel return air grille is not completely flat. The front service is around ~0.4 inches from the wall, where it covers the opening of the duct.

We've got a massive range of return air grilles, which you can browse here.

Search