FREE 2-DAY SHIPPING on all orders!

Questions? We can help! Call us now at: 1-888-404-HVAC (4822)

FLTR M8-2024

20" x 24" Pleated MERV 8 Allergen Filter for HVAC

Out of stock. Notify me when this product is available:

  • Also To Be USed As 24 x 20 - A Unique Combination of Cotton & Synthetic Fibers Gives You The Most Filtration And The Least Air Resistance - Equals Great Air & Easy Airflow For Your System
  • The "W" Shaped Pleats Give You More Filter Surface Thereby Capturing More Dust While Causing Less Air Restriction To Your HVAC Air System
  • All Our Filters Are Tested Per ASHRAE-52.2 Standards - MERV 8 - And An Average Arrestance Of 90-94%
  • Extra Strong Frame - Our Frames Are The Strongest On The Market, No Competitor Comes Close To Us - We Use Extra Thick Board That Is Moisture Resistant, And The Full Outer Portion Is Double Layered.
  • Our Metal Net And Paper Diagonal Support Bars Ensure The Filter Can Hold An Extra Heavy Load Of Dirt And Not Break In As Others Do. We Use Special Materials To Prevent Corrosion
20" x 24" Pleated MERV 8 Allergen Filter for HVAC Return Filter Grille
Actual Dimensions: 19.75" X 23.75"
Also to be used as 24" x 20"

A Unique Combination of Cotton & Synthetic Fibers Gives You The Most Filtration And The Least Air Resistance - Equals Great Air & Easy Airflow For Your System
The "W" Shaped Pleats Give You More Filter Surface Thereby Capturing More Dust
All Our Filter Are Tested Per ASHRAE-52.2 Standards - MERV 8 - And An Average Arrestance Of 90-94%
Extra Strong Frame - Our Frames Are The Strongest On The Market, No Competitor Comes Close To Us - We Use Extra Thick Board That Is Moisture Resistant, And The Full Outer Portion Is Double Layered.
Our Metal Net And Paper Diagonal Support Bars Ensure The Filter Can Hold AN extra Heavy Load Of Dirt. We Use Special Materials To Prevent Corrosion

What Is A MERV Rating?
Minimum Efficiency Reporting Value (MERV) is a standard that rates the overall effectiveness of air filters. Higher value MERV rating equates to finer filtration, meaning fewer dust particles and other airborne contaminants can pass through the filter.

MERV 8 - The Perfect Balance.
MERV 8 is the most recommended level of filtration by industry professionals.
If you still have the fiberglass low quality filter that is below MERV 4, you should change NOW! You are missing out on healthier breathing and life.

Why HVAC Premium?
Our MERV 8 pleated filter is 30 times more efficient at capturing micro particles than ordinary fiberglass filters.
Our MERV 8 pleated filter attracts and captures airborne particles/allergens from 3 to 10 microns such as pollen, fine dust, and pet dander.
Designed to last up to three months depending.

*** 100% Satisfaction Guarantee. ***
What does this mean? If for any reason you are not 100% satisfied with the filters-we will refund your money. Guaranteed.

WE'VE GOT YOU COVERED

Don’t worry, you’re covered by our 100% money-back guarantee no questions asked. Click Add to Cart and enjoy a new updated refreshing look to your home.

Why HVAC Premium? 

You may think of grilles and registers as a generic component of the ventilation system in your house, but they are also the most visible representation of your air system. With HVAC Premium you get an extra measure of quality that will be visible to your family members and house guests.

Additional Information

Installation Document Coming soon

Full Specifications

Dimensions

?

Width

?

20 in

?

Height

?

24 in

Details

?

Type

?

Filter

?

Color/Finish

?

White

?

Airflow Strength

?

Maximum

?

Merv Rating

?

8

?

Installation Location

?

Sidewall & Ceiling

?

?

Warranty/Terms & Conditions

?

Returnable

?

30 Days

?

?

How To Measure For A New Filter

Overall Size

Measure the size of the filter opening. Do not measure the old vent cover. If your filter opening is 14" wide by 20" long, order a 14x20

Height vs. Width

The first number in a grille size represents the width, the second number represents the length.

Installation

HVAC Installation FAQs.

You should replace your HVAC filters every 30 days to keep your air healthy and your HVAC system running efficiently. To help you, here’s a simple guide to changing your filters for vent registers:

1. Turn your HVAC unit off.

2. Slide the tabs to open the door on your air filter grille to access the filter.

3. Remove the used or dirty filter.

4. Before installing your new filter, ensure the airflow arrows are pointing in the direction of your unit.

5. Once the filter is installed, close the door on your air filter grille.

6. Turn your HVAC unit on for clean, healthy air.

For our full catalog of filters — including our pleated MERV 8 products — click here.

A 24x24 ceiling return air grille will need a larger frame. For example, if your grille is 24x24 it will in all probability have a 26x26 diameter. This means that the grille will need a 24x24 hole and a 26x26 frame to fit properly.

Installation

Turn off your HVAC unit. Wear protective goggles to keep any dust or dirt particles from falling from the ceiling return air grille and into your eyes. Secure your ladder and then unscrew the frame to remove the grille. Next, put the frame in place and secure it with screws. Install the new grille to complete the task.

Click here to browse our comprehensive catalog of sidewall and ceiling supply return grilles.

First off, a 20x20 decorative air return grille will require a larger frame for optimum installation. This means that a 20x20 decorative air return grille with 22x22 dimensions will need a 20x20 hole and a 22x22 frame to fit properly.

Once you've got the sizes sorted, unscrew the frame and then take out the grille. Next, put the frame in place and secure it with screws. Once that’s done, install the new grille to complete the task.

For high-quality products with visual appeal, browse our full range of air return grilles.

1. Measure the size of the vent hole and the frame to ensure you purchase the correct grille size. A return air filter grille with a 20x20 size and 22x22 dimensions will require a 20x20 hole and a 22x22 frame.

2. Unscrew the frame and then remove the grille. Position the frame and secure it with screws. Once the frame is in place, install the new grille to complete the task.

Browse our comprehensive catalog of return air filter grilles here

Correct! The grille requires a 12 x 12 hole with a larger frame.

Check out our comprehensive range of wall vent grilles.

Screw out the old grille, and then unpackage and screw in your new grille. All HVAC Premium grilles come with either black or white hex head screws to match the color of your grille. If you're installing a filter model, you'll need to open the filter grille and find the holes at the sides to screw into the wall. Once you close the filter door, the screws won't be noticeable.

Click here to view our catalog which comprises of a comprehensive range of grilles

The most commonly used material is steel because it's strong and economical. However, if your grille is located in a humid place — such as next to a sauna, swimming pool, or in a bathroom — plastic or aluminum materials are the common materials used. Plastic, however, is at a disadvantage as it lacks strength and can discolor over time. Your best bet for areas with high humidity is aluminum. HVAC Premium has a wide range of aluminum grilles, from Cubic Core to perforated — you can view our selection here.

To find out more about our aluminum Cube Core grilles, click here.

The steel return air grille is not completely flat. The front service is around ~0.4 inches from the wall, where it covers the opening of the duct.

We've got a massive range of return air grilles, which you can browse here.

Search